Delivering High Quality Buttweld Fittings in Elbow, Tee, Reducer, Cap, Stub End etc.
sales@savoypipinginc.com

ISO 3183 Seamless Pipes

Petroleum and Natural Gas Industries — Steel pipe for Pipeline Transportation Systems

ISO 3183 Seamless Line Pipes, ISO 3183 Pipes, ISO 3183 Seamless Pipes, ISO 3183 High Tensile Pipes, ISO 3183 Carbon Steel Pipes

ISO3183 Seamless Pipes PSL1 / PSL2 Certified and Tested in accordance with ISO 15156, NACE MRO175 / 103, HIC, SWC, SSC, SSCC, SOUR Service, H2S, IMPACT, Post Weld Heat Treatment (PWHT), IBR, High yield, IPS-M-PI-190, IPS-M-PI-221 etc.


ISO 3183 Grade L245 PSL1, ISO 3183 Grade L245 PSL2, ISO 3183 Grade L290 PSL1, ISO 3183 Grade L290 PSL2, ISO 3183 Grade L320 PSL1, ISO 3183 Grade L320 PSL2, ISO 3183 Grade L360 PSL1, ISO 3183 Grade L360 PSL2, ISO 3183 Grade L390 PSL1, ISO 3183 Grade L390 PSL2, ISO 3183 Grade L415 PSL1, ISO 3183 Grade L415 PSL2, ISO 3183 Grade L450 PSL1, ISO 3183 Grade L450 PSL2, ISO 3183 Grade L485 PSL1, ISO 3183 Grade L485 PSL2

Grades: L245, L290, L320, L360, L390, L415, L450 in PSL1 and PSL2.

Savoy Piping Inc., we carry a full inventory of ISO 3183 Pipe Carbon Steel Pipe products in a variety of sizes to meet the structural piping requirements for applications the water, petroleum, oil & gas and other industries. ISO 3183 Seamless Pipe Carbon Steel Pipe can be Structural in Nature or used in Fluid, Gas, Oil Transmission.

We Supply ISO 3183 Seamless Pipe in ISO 3183 L245 PSL1, ISO 3183 L245 PSL2, ISO 3183 L290 PSL1, ISO 3183 L290 PSL2, ISO 3183 L320 PSL1, ISO 3183 L320 PSL2, ISO 3183 L390 PSL1, ISO 3183 L390 PSL2, ISO 3183 L415 PSL1, ISO 3183 L415 PSL2, ISO 3183 L450 PSL1, ISO 3183 L450 PSL2 .The grade indicates the testing methods required for a given application. It is critical that structural grades of Carbon Steel Pipe not be used for Pressure or Fluid applications.

Savoy Piping Inc. specializes in ISO 3183 Seamless Line Pipe with years of Experience in Manufacturing ISO 3183 Carbon Steel Pipes. we offer high quality, lower cost but the best service. As a result to that our ISO 3183 Carbon Steel Pipes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.



Seamless ISO 3183 Pipe for dependable transmission of oil and gas to any type of collection and distribution point This International Standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of Seamless and Welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.

This International Standard is not applicable to cast pipe.

The purpose of this specification is to provide standards for pipe suitable for use in conveying gas, and oil in both the oil and natural gas industries

Grades covered by this specification are L245, L290, L360, L390, L415, L450 etc.

Savoy Piping Inc. Supply a full range of ISO 3183 Seamless Pipes in PSL-1 & PSL-2 pipe.

our ISO 3183 Seamless Line Pipe range

ISO 3183 Seamless Pipe Specification ISO 3183
ISO 3183 Seamless Pipe Grades ISO 3183 Grade L245 PSL1, ISO 3183 Grade L245 PSL2, ISO 3183 Grade L290 PSL1, ISO 3183 Grade L290 PSL2, ISO 3183 Grade L320 PSL1, ISO 3183 Grade L320 PSL2, ISO 3183 Grade L360 PSL1, ISO 3183 Grade L360 PSL2, ISO 3183 Grade L390 PSL1, ISO 3183 Grade L390 PSL2, ISO 3183 Grade L415 PSL1, ISO 3183 Grade L415 PSL2, ISO 3183 Grade L450 PSL1, ISO 3183 Grade L450 PSL2, ISO 3183 Grade L485 PSL1, ISO 3183 Grade L485 PSL2
ISO 3183 Seamless Pipe Type Seamless
ISO 3183 Seamless Pipe Outer Diameter Size 3/8" NB to 30" NB (Nominal Bore Size)
ISO 3183 Seamless Pipe Wall Thickness Schedule 20 to Schedule XXS (Heavier On Request) Up to 250 mm Thickness
ISO 3183 Seamless Pipe Length 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size.
ISO 3183 Seamless Pipe Ends Plain Ends / Beveled Ends / Coupling
ISO 3183 Seamless Pipe Delivery Conditions As Rolled, Normalizing Rolled, Hot Forming, Cold Finishing Thermomechanical Rolled / Formed, Normalizing Formed, Normalized and Tempered / Quenched and Tempered - BR / N / Q /T
ISO 3183 Seamless Pipe Coating Epoxy Coating / Colour Paint Coating / 3LPE Coating.
ISO 3183 Seamless Pipe Other Testing NACE MR0175, NACE TM0177, SOUR SERVICE, NACE TM0284, PWHT, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, IPS-M-PI190, IPS-M-PI-221 APPENDIX G Etc.
ISO 3183 Seamless Pipe Dimension All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM, ASME, API.
ISO 3183 Seamless Pipe Value Added Services Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Galavanizing / Heat Treatment
ISO 3183 Seamless Pipe Packaging Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
ISO 3183 Seamless Pipe Shipment & Transportation By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet
ISO 3183 Seamless Pipe Material Test Certificate Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab./ Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

iSO 3183 PSL1 Seamless Pipes Chemical CompositionS with t u 25,0 mm (0.984 in)

Steel grade
(Steel name)		 Mass fraction, based upon heat and product analyses a %
C Mn P S V Nb Ti
max. b  max. b  min. max. max. max. max. max.
Seamless Pipe
L175 or A25 0,21 0,60 - 0,03 0,03 -
L175P or A25P 0,21 0,60 0,045 0,08 0,03 -
L210 or A 0,22 0,90 - 0,03 0,03
L245 or B 0,28 1,20 - 0,03 0,03 c,d c,d d
L290 or X42 0,28 1,30 - 0,03 0,03 d d d
L320 or X46 0,28 1,40 - 0,03 0,03 d d d
L360 or X52 0,28 1,40 - 0,03 0,03 d d d
L390 or X56 0,28 1,40 - 0,03 0,03 d d d
L415 or X60 0,28 e 1,40 e - 0,03 0,03 f f f
L450 or X65 0,28 e 1,40 e - 0,03 0,03 f f f
L485 or X70 0,28 e 1,40 e - 0,03 0,03 f f f
Welded Pipe
L175 or A25 0,21 0,60 - 0,03 0,03 -
L175P or A25P 0,21 0,60 0,045 0,08 0,03 -
L210 or A 0,22 0,90 - 0,03 0,03
L245 or B 0,26 1,20 - 0,03 0,03 c,d c,d d
L290 or X42 0,26 1,30 - 0,03 0,03 d d d
L320 or X46 0,26 1,40 - 0,03 0,03 d d d
L360 or X52 0,26 1,40 - 0,03 0,03 d d d
L390 or X56 0,26 1,40 - 0,03 0,03 d d d
L415 or X60 0,26 e 1,40 e - 0,03 0,03 f f f
L450 or X65 0,26 e 1,45 e - 0,03 0,03 f f f
L485 or X70 0,26 e 1,65 e - 0,03 0,03 f f f
a 0,50 % maximum for copper; 0,50 % maximum for nickel; 0,50 % maximum for chromium; and 0,15 % maximum for molybdenum,For grades up to and including L360/X52, Cu, Cr and Ni shall not be added intentionally.
b for each reduction of 0,01 % below the specified maximum concentration for carbon, an increase of 0,05 % above the specified maximum concentration for manganese is permissible, up to a maximum of 1,65 % for grades W L245 or B, but u L360 or X52; up to a maximum of 1,75 % for grades > L360 or X52, but < L485 or X70; and up to a maximum of 2,00 % for grade L485 or X70,
c Unless otherwise agreed, the sum of the niobium and vanadium contents shall be u 0,06 %,
d The sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %,
e Unless otherwise agreed.
f Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %.

ISO 3183 PSL2 Seamless Pipe Chemical CompositionS with t u 25,0 mm (0.984 in)

Steel grade
(Steel name)		 Mass fraction, based upon heat and product analyses a % Carbon equivalent a % maximum
C Si Mn P S V Nb Ti Other CE iiw CE pcm
Seamless Pipe
L245R or BR 0,24 0,4 1,2 0,025 0,015 c c 0,04 e 0,43 0,25
L290R or X42 R 0,24 0,4 1,2 0,025 0,015 0,06 0,05 0,04 e 0,43 0,25
L245N or BN 0,24 0,4 1,2 0,025 0,015 c c 0,04 e 0,43 0,25
L290N or X42N 0,24 0,4 1,2 0,025 0,015 0,06 0,05 0,04 e 0,43 0,25
L320N or X46N 0,24 0,4 1,2 0,025 0,015 0,07 0,05 0,04 d,e 0,43 0,25
L360N or X52N 0,24 0,45 1,4 0,025 0,015 0,1 0 0,04 d,e 0,43 0,25
L390N or X56N 0,24 0,45 1,4 0,025 0,015 0,10 f 50,05 0,04 d,e 0,43 0,25
L415N or X60N 0,24 f 0,45 f 0,45 f 0,025 0,015 0,10 f 0,05 f 0,04 f g,h as agreed
L245Q or BQ 0,18 0,45 1,4 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L290Q or X42Q 0,18 0,45 1,4 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L320Q or X46Q 0,18 0,45 1,4 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L360Q or X52Q 0,18 0,45 1,5 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L390Q or X56Q 0,18 0,45 1,5 0,025 0,015 0,07 0,05 0,04 d,e 0,43 0,25
L415Q or X60Q 0,18 f 0,45 f 1,70 f 0,025 0,015 g g g h 0,43 0,25
L450Q or X65Q 0,18 f 0,45 f 1,70 f 0,025 0,015 g g g h 0,43 0,25
L485Q or X70Q 0,18 f 0,45 f 1,80 f 0,025 0,015 g g g h 0,43 0,25
L555Q or X80Q 0,18 f 0,45 f 1,90 f 0,025 0,015 g g g I,j as agreed
Welded Pipe
L245M or BM 0,22 0,45 1,2 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L290M or X42M 0,22 0,45 1,3 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L320M or X46M 0,22 0,45 1,3 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L360M or X52M 0,22 0,45 1,4 0,025 0,015 d d d e 0,43 0,25
L390M or X56M 0,22 0,45 1,4 0,025 0,015 d d d e 0,43 0,25
L415M or X60M 0,12 f 0,45 f 1,60 f 0,025 0,015 g g g h 0,43 0,25
L450M or X65M 0,12 f 0,45 f 1,60 f 0,025 0,015 g g g h 0,43 0,25
L485M or X70M 0,12 f 0,45 f 1,70 f 0,025 0,015 g g g h 0,43 0,25
L555M or X80M 0,12 f 0,45 f 1,85 f 0,025 0,015 g g g i 0,43 f 0,25
L625M or X90M 0,1 0,55 f 2,10 f 0,02 0,015 g g g i  - 0,25
L690M or X100M 0,1 0,55 f 2,10 f 0,02 0,015 g g g I,j 0,25
L830M or 120X 0,1 0,55 f 2,10 f 0,02 0,015 g g g I,j 0,25
a Based upon product analysis. for seamless pipe with t > 20,0 mm (0.787 in), the carbon equivalent limits shall be as agreed. The
CEIIW limits apply if the carbon mass fraction is greater than 0,12 % and the CEPcm limits apply if the carbon mass fraction is less than or equal to 0,12 %.
b for each reduction of 0,01 % below the specified maximum for carbon, an increase of 0,05 % above the specified maximum for
manganese is permissible, up to a maximum of 1,65 % for grades W L245 or B, but u L360 or X52; up to a maximum of 1,75 % for
grades > L360 or X52, but < L485 or X70; up to a maximum of 2,00 % for grades W L485 or X70, but u L555 or X80; and up to a
maximum of 2,20 % for grades > L555 or X80.
c Unless otherwise agreed, the sum of the niobium and vanadium concentrations shall be u 0,06 %.
d The sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %.
e Unless otherwise agreed, 0,50 % maximum for copper, 0,30 % maximum for nickel, 0,30 % maximum for chromium and 0,15 %
maximum for molybdenum.
f Unless otherwise agreed.
g Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be u 0,15 %.
Unless otherwise agreed, 0,50 % maximum for copper, 0,50 % maximum for nickel, 0,50 % maximum for chromium and 0,50 %
maximum for molybdenum.
i Unless otherwise agreed, 0,50 % maximum for copper, 1,00 % maximum for nickel, 0,50 % maximum for chromium and 0,50 %
maximum for molybdenum.
j 0,004 % maximum for boron.

iso 3183 psl1 Seamless Pipes tensile properties

Pipe Grade Pipe Body of Seamless and Welded Pipes Weld seam of EW, SAW and COW pipes
Yeild strength a Tensile strength a Elongation Tensile strength b
Rt0.5 Rm Af Rm
Mpa (psi) Mpa (psi) % Mpa (psi)
minimum minimum minimum minimum
L175 or A25 175 (25 400) 310 (45 000) c 310 (45 000)
L175P or A25P 175 (25 400) 310 (45 000) c 310 (45 000)
L210 or A 210 (30 500) 335 (48 600) c 335 (48 600)
L245 or BR
L245 or B		 245 (35 500) 415 (60 200) c 415 (60 200)
L290R or x42R
L290 or x42		 290 (42 100) 415 (60 200) c 415 (60 200)
L320 or X46 320 (46 400) 435 (63 100) c 435 (63 100)
L360 or X52 360 (52 200) 460 (66 700) c 460 (66 700)
L390 or X56 390 (56 600) 490 (79 100) c 490 (71 100)
L415 or X60 415 (60 200) 520 (75 400) c 520 (75 400)
L450 or X65 450 (65 300) 535 (77 600) c 535 (77 600)
L485 or X70 485 (70 300) 570 (82 700) c 570 (82 700)

ISO 3183 PSL2 Seamless Pipe TENSILE PROPERTIES

Pipe grade Pipe Body of Seamless and Welded Pipes weld seam of HFW, SAW and COW pipes
Yield Strength a Tensile Strength a Ratio a,b,c Elongation Af Tensile strength d
Rt0.5 b Rm Rt0,5lRm Rm
Mpa (psi) Mpa (psi) % Mpa (psi)
minimum maximum minimum maximum maximum minimum minimum
L245R or BR
L245N or BN
L245Q or BQ
L245M or BM		 245
(35 500)		 450 e
(65 300) e		 415
(60 200)		 760
(110 200)		 0,93 f 415
(60 200)
L290R or X42R
L290N or X42N
L290Q or X42Q
L290M or X42M		 290
(42 100)		 495
(71 800)		 415
(60 200)		 760
(110 200)		 0,93 f 415
(60 200)
L320N or X46N
L320Q or X46Q
L320M or X46M		 320
(46 400)		 525
(76 100)		 435
(63 100)		 760
(110 200)		 0,93 f 435
(63 100)
L360N or X52N
L360Q or X52Q
L360M or X52M		 360
(52 200)		 530
(76 900)		 460
(66 700)		 760
(110 200)		 0,93 f 460
(66 700)
L390N or X56N
L390Q or X56Q
L390M or X56M		 390
(56 600)		 545
(79 000)		 490
(71 100)		 760
(110 200)		 0,93 f 490
(71 100)
L415N or X60N
L415Q or X60Q
L415M or X60M		 415
(60 200)		 565
( 81 900)		 520
(75 400)		 760
(110 200)		 0,93 f 520
(75 400)
L450Q or X65Q
L450M or X65M		 450
(65 300)		 600
(87 000)		 535
(77 600)		 760
(110 200)		 0,93 f 535
(77 600)
L485Q or X70Q
L485M or X70M		 485
(70 300)		 635
(92 100)		 570
(82 700)		 760
(110 200)		 0,93 f 570
(82 700)

other test for ISO 3183 Seamless Pipes

HYDROSTATIC TEST
BEND TEST
CVN IMPACT TEST
DWT TEST
ISO 3183 Pipes AS PER ANNEX A, ANNEX B, ANNEX C, ANNEX D ANNEX E, ANNEX G, ANMEX H, ANNEX I, ANNEX J, ANNEX K, ANNEX L, ANNEX M.

Supplying ISO 3183 Pipes to Countries -

We Export ISO 3183 Seamless Pipe to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc

Savoy Piping Inc. is a well known worldwide exporter of ISO 3183 Seamless Pipe, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deals in ISO 3183 Seamless Pipe in India and Overseas, offering a wide range of ISO 3183 Pipes