Savoy Piping Inc., we carry a full inventory of Copper Pipe and Supply Copper Tube products in a variety of sizes to meet the corrosion resistance in a range of media including water, steam, chemicals, etc.
We Supply Copper Pipes and Tubes in Copper Pan Cake Coils, DLP Copper Pipes and Tubes, DHP Copper Pipes and Tubes, ETP Copper Pipes and Tubes, Copper Pipes and Tubes for Refrigeration & Air Conditions, Copper Pipes and Tubes for General Engineering, Copper Medical Tubes, PVC Coated Copper Tubes, Copper Capillary Tubes, CFC Free Copper Tubes, Copper Tubes for Heater and Solar Application, Copper Tubes for Plumbing etc.
Savoy Piping Inc. specializes in Copper Pipes and Tube with years of Experience in Manufacturing Copper Pipes and Tube. we offer high quality, lower cost but the best service. As a result to that our Copper Pipes and Tubes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.
COPPER Pipes and Tubes
Copper Tubing is most often used for supply of hot and cold tap water, and as refrigerant line in HVAC systems. There are two basic types of copper tubing, soft copper and rigid copper. Copper tubing is joined using flare connection, compression connection, or solder. Copper offers a high level of corrosion resistance, but is becoming very costly.
Soft copper
Soft (or ductile) copper tubing can be bent easily to travel around obstacles in the path of the tubing. While the work hardening of the drawing process used to size the tubing makes the copper hard or rigid, it is carefully annealed to make it soft again; it is therefore more expensive to produce than non-annealed, rigid copper tubing. It can be joined by any of the three methods used for rigid copper, and it is the only type of copper tubing suitable for flare connections. Soft copper is the most popular choice for refrigerant lines in split-system air conditioners and heat pumps.
Rigid copper
Rigid copper is a popular choice for water lines. It is joined using a sweat, roll grooved, compression or crimped/pressed connection. Rigid copper, rigid due to the work hardening of the drawing process, cannot be bent and must use elbow fittings to go around corners or around obstacles. If heated and allowed to cool in a process called annealing, rigid copper will become soft and can be bent/formed without cracking.
Copper Pipe & Tubes Specification and Grade | ASTM B 68 C 12200, ASTM B 75 DLP C12000, BS 2871 Part 2 C 101, BS 2871 Part 3 C 106, EN 12451 DHP, JIS H3300 C 1220, ASTM B 68 C 12200, ASTM B 75 DLP C12000, BS 2871 Part 2 C 101, BS 2871 Part 3 C 106, EN 12451 DHP, JIS H3300 C 1220, BS 2871 PART II/72 C 101 NR, EQUIVALENT SPEC. BS 1977/63, ASTM B68, ASTM B75, ASTM B280, ASTM B88, JIS H 3300, EN1057 or BS2871: PART 2:1972, DIN 1754/8905/ IS2501, Internal Client Specification |
Copper Pipe & Tubes Application |
|
Copper Pipe & Tubes Type | ot Rolled / Cold Drawn / Welded / ERW |
Copper Pipe & Tubes Outer Diameter Size |
1/4 NB TO 12" NB 3 MM OD TO 114.3 MM OD |
Copper Pipe & Tubes Wall Thickness | Schedule 10 to Schedule 160 |
Copper Pipe & Tubes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
Copper Pipe & Tubes Pipe Ends | Plain Ends / Beveled Ends |
Copper Pipe & Tubes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
Copper Pipe & Tubes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
Copper Pipe & Tubes Other Testing | NACE MRO175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc. |
Copper Pipe & Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
Copper Pipe & Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
Copper Pipe & Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
Copper Pipe & Tubes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
Copper Pipe & Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
Using latest technology & optimum quality raw materials, we are manufacturing and exporting our clients a wide assortment of DLP Copper Tubes. Owing to their salient features such as durability, corrosion & rust resistance, high tensile strength and unmatched performance, our DLP Copper Tubes find applications in varied industries. Our products pass through stringent quality checks before final dispatch to ensure that the clients get a defect free range of copper tubes.
Specification : | |
DLP Copper |
|
Chemical Requirements | |||
Copper | 99.85% min | ||
Phosphorus | 0.013 to 0.05% | ||
Total Imp. Excl. Mn | 0.06% max | ||
Physical Properties | |||
Condition | T.S.Kg/mm 2 | EL% Min | |
Annealed | 21.5 | 33% | |
As manufactured | 23.5 | 13% | |
Fabrication Properties | |||
Capacity for being | |||
Cold worked | Excellent | ||
ot formed | Excellent | ||
Suitability for soldering | Good | ||
Suitability for Brazing | Good | ||
Immunity to hydrogen | Excellent | ||
Embrittlement | |||
Uses | |||
General Engineering Purpose & Electrical Component |
We are one of the leading manufacturers, exporters and suppliers of a large array of DHP Copper Tubes. These are used in different industries due to their flawless quality, durable finish standards, rigid construction, reliable performance and corrosion & wear resistance. Accurate in dimensions, our DHP Copper Tubes are offered in customized forms at highly affordable prices.
Specification : |
|
DHP Copper |
|
Chemical Requirements | |||
Copper | 99.85% min | ||
Phosphorus | 0.013 to 0.05% | ||
Total Imp. Excl. Mn | 0.06% max | ||
Physical Properties | |||
Condition | T.S.Kg/mm 2 | EL% Min | |
Annealed | 21.5 | 33% | |
As manufactured | 23.5 | 13% | |
Fabrication Properties | |||
Capacity for being | |||
Cold worked | Excellent | ||
ot formed | Excellent | ||
Suitability for soldering | Good | ||
Suitability for Brazing | Good | ||
Immunity to hydrogen | Excellent | ||
Embrittlement | |||
Uses | |||
General Engineering Purpose & Electrical Component |
Physical Properties | ||
Condition | T.S.Kg/mm2 | EL% Min |
Annealed | 21.5 to 25.5 | 40% |
As manufactured | 27.5 min |
Uses |
Where electrical in high voltage installation is required |
Chemical Requirements | |
Copper + Silver | 99.95% |
Phosphorous | 0.015% to 0.4% |
Physical Properties | ||
Condition | T.S.Kg/mm2 | EL% Min |
Annealed | 21 | 40% |
Further Tests | ||
Flattening Test Double Over Test Pneumatic Hydrogen Embrittlement Cleanliness & Microstructure Test |
Uses |
Refrigeration & Air Conditioning |
BS 2871 PART II/72 C 101 NR. EQUIVALENT SPEC. BS 1977/63
Chemical Requirements | C106 | C107 |
Copper + Silver | 99.85% min | 99.2% min |
Phosphorous | 0.013 to 0.05% | 0.013 to 0.05% |
Arsenical | - | 0.03 to 0.5% |
Total Imp. | 0.06% max | 0.07% max |
Physical Properties | ||||
Condition | T.S. MPa | EL% Min | T.S. MPa | EL% Min |
Annealed (O) | 200-250 | 40% | 200-250 | 40% |
Half Hard (HB) | 250 min | 30% | 250 min | 30% |
As manufactured (M) | 280 min | - | 280 min | - |
Further Tests | |
Drift Test Flattening Test Hydraulic Test |
Uses | |
DHP - Condensers, Evaporators, Oil Burner Tubing, Steam, Water, Air and Hydraulic Lines DPA - Heat Exchanger Tubes, Brewery Tubes, Gas Lines Vapour Lines, Sanitation Lines, Locomotive Tubes |
The Copper Pipes and Tubes is used in the following applications:-
We specialize in manufacturing and exporting a quality proven range of ETP Copper Tubes which finds usage in different industries. These are available in diverse grades, dimensions, thicknesses and at affordable prices to meet clients' budgetary requirements. Extremely durable, sturdy in construction, corrosion resistant and high performing, our ETP Copper Tubes are examined rigorously before final dispatch & offered at diminutive prices.
Specification : |
|
EC / ETP Copper |
|
Chemical Requirements | |
Copper + Silver | 99.90% |
Lead | 0.005% |
Total Imp. (Excl. Oxygen) | 0.03% |
We Export Copper Pipes and Tubes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc
Savoy Piping Inc. is a well known worldwide Exporter of Copper Pipes and Tubes, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deals in Copper Pipes and Tube in India and Overseas, offering a wide range of Copper Pipes and Tubes