( UNS NO6600 / UNS N06601 / UNS N06625)
Savoy Piping Inc., we carry a full inventory of Inconel 600 / 601 / 625 Pipes and Tube and Supply Alloy 600 / 601 / 625 Pipes and Tube products is a a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. This nickel alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process application in an as welded condition.
We Supply Inconel Pipes and Tubes in ASTM B163, ASTM B167, ASTM B444, ASTM B829,The grade indicates the testing methods required for a given application.
Savoy Piping Inc. specializes in Inconel 600 / 601 / 625 Pipes and Tube with years of Experience in Manufacturing UNS N06600 / UNS NO6601 / UNS NO6025 Pipes and Tube. we offer high quality, lower cost but the best service. As a result to that our Inconel 600 / 601 / 625 Pipes and Tubes export account today is in various countries like Iran, Iraq, Kuwait, Saudi Arabia, Oman, UAE, Singapore, Malaysia, Indonesia, South korea, Chile, Peru, Venezuela, Australia, Nigeria, Angola, Senegal, Mozambique, Algeria, Libya, Azerbaijan, Netherlands, Brazil, Norway, United Kingdom, Mexico, Canada etc.
Inconel 600 / 601 / 625 /
Inconel is a family of austenitic nickel-chromium-based superalloys.
Inconel alloys are oxidation- and corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel’s high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.
These Inconel alloys or superalloys are nickel-based alloys that exhibit traits such as high resistance to corrosion, oxidation, carburization, pitting, crevice, corrosion cracking, and high temperature strength. Often, Inconel is referred to as “Inco”.
Alloys of identical chemical and Mechanical Properties are available from other manufacturers and offer excellent alternatives to the various Inconel® brand alloys.
The corrosion-resistant superalloys are widely used in extreme environments where tremendous heat and corrosion resistance is paramount to the integrity of the end product. Chemical processing, nuclear, petrochemical, aerospace and marine industries widely use these superalloys.
INCONEL® is a registered trademark of the Special Metals Corporation.
Inconel 600 / 601 / 625 Pipe & Tubes Specification | ASTM B163 / ASTM B167 / ASTM B444 / ASTM B829 / ASME SB163 / ASME SB167 / ASME SB444 / ASME SB829 |
Inconel 600 / 601 / 625 Pipe & Tubes Grades | INCONEL 600 / Inconel 601 / Inconel 625 / UNS NO6600 / UNS NO6601 / UNS NO 6625 |
Inconel 600 / 601 / 625 Pipe & Tubes Type | Cold Drawn / Welded / ERW |
Inconel 600 / 601 / 625 Pipe & Tubes Outer Diameter Size | Seamless - 1/4" NB to 6" NB (Nominal Bore Size) Welded / ERW- 1" NB to 16" NB (Nominal Bore Size) |
Inconel 600 / 601 / 625 Pipe & Tubes Wall Thickness | Schedule 10 to Schedule 160 |
Inconel 600 / 601 / 625 Pipe & Tubes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
Inconel 600 / 601 / 625 Pipe & Tubes Pipe Ends | Plain Ends / Beveled Ends |
Inconel 600 / 601 / 625 Pipe & Tubes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
Inconel 600 / 601 / 625 Pipe & Tubes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
Inconel 600 / 601 / 625 Pipe & Tubes Other Testing | NACE MRO175, Hardness Test, Flare, Hydrostatic Test, Eddy Current test, Grain Size Test, Eddy Current, Annealed, Tempered, Stress Relieved etc. |
Inconel 600 / 601 / 625 Pipe & Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
Inconel 600 / 601 / 625 Pipe & Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
Inconel 600 / 601 / 625 Pipe & Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
Inconel 600 / 601 / 625 Pipe & Tubes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
Inconel 600 / 601 / 625 Pipe & Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
This specification covers Seamless Tubes of nickel and nickel alloys, as shown in Table 1, for use in condenser and heat-exchanger service.
(A) Maximum unless range or minimum is given. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.
(B) Element shall be determined arithmetically by difference.
(A) Maximum unless range or minimum is given. Where ellipses (...) appear in this table, there is no requirement and analysis for the element need not be determined or reported.
(B) Element shall be determined arithmetically by difference.
(C) Alloy UNS N08811: Al + Ti, 0.85 − 1.20.
This specification covers outside diameter and average wall, or outside diameter and minimum wall tube.
The sizes covered by this specification are 3 in. (76.2 mm) and under in outside diameter with minimum wall thicknesses of 0.148 in. (3.76 mm) and under, and with average wall thicknesses of 0.165 in. (4.19 mm) and under.
Tube shall be furnished in the alloys and conditions as shown in Table 2. for small diameter and light wall tube (converter sizes), see Appendix X2.
(A) Alloy UNS N08800 is normally employed in service temperatures up to and including 1100°F (593°C). Alloys UNS N08810, UNS N08811, and UNS N08120 are normally employed in service temperatures above 1100°F (539°C) where resistance to creep and rupture is required, and it is annealed to develop controlled grain size for optimum properties in this temperature range.
The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Keywords
Condenser Tubes - Condensers - Heat Exchanger Tubes - Heat Exchangers - Nickel - Nickel Alloys - Seamless Nickel Alloy Tubes - Seamless Pipes and Tubes
ASTM B167 Inconel 600 / 601 / ASME SB167 Inconel 600 / 601 Seamless Tubes
Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N0625, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube
1.1 This specification2 covers nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N0625, N06045, and N06696),3 nickel-chromium-cobalt-molybdenum alloy (UNS N06617), and nickel-iron-chromium-tungsten alloy UNS N06674), in cold-worked annealed, hot-worked annealed, and hot-finished seamless pipe and tube intended for general corrosion resistant and heat resistant applications.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 The following safety hazards caveat pertains only to the test methods portion, Section 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
Keywords
Corrosive Service Applications - Heat Treatment - High-Temperature Service Applications - High-Temperature Services - Nickel-Chromium Alloys - Nickel-Chromium-Cobalt Alloys - Nickel-Iron-Chromium Alloys - Seamless Nickel Alloy Pipes - Seamless Nickel Alloy Tubes - Seamless Pipes and Tubes
ASTM B444 Inconel 625 / ASME SB444 Inconel 625 Seamless Pipes and Tubes
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
1.1 This specification2 covers nickel-chromium-molybdenum-columbium alloys (UNS N06625 and UNS N06852) and nickel-chromium-molybdenum-silicon alloy (UNS N06219)3 in the form of cold-worked seamless pipe and tube. The general requirements for pipe and tube are covered by Specification B829.
1.1.1 UNS N06625 products are furnished in two grades of different heat-treated conditions:
1.1.1.1 Grade 1 (annealed)—Material is normally employed in service temperatures up to 1100°F (593°C).
1.1.1.2 Grade 2 (solution annealed)—Material is normally employed in service temperatures above 1100°F (593°C) when resistance to creep and rupture is required.
NOTE 1: Hot-working or reannealing may change properties significantly, depending on working history and temperatures.
1.1.2 Alloys UNS N06219 and UNS N06852 are supplied in the solution annealed condition only.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Keywords
Annealing - Cold Working - Forming - Nickel-Chromium-Molybdenum Alloys - Nickel-Chromium-Molybdenum-Columbium Alloys - Nickel-Chromium-Molybdenum-Silicon Alloys - Seamless Nickel Alloy Pipes - Seamless Nickel Alloy Tubes - Seamless Pipes and Tubes.
ASTM B829 Inconel 600 / 601 / 625 / ASME SB829 Inconel 600 / 601 / 625 Seamless Pipes and Tubes
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
This specification contains various requirements that, with the exception of Sections 5 and 10, are mandatory requirements to the following ASTM nickel and nickel alloy, seamless pipe and tube specifications:
1.2 One or more of the test requirements of Section 5 apply only if specifically stated in the product specification or in the purchase order.
1.3 In case of conflict between a requirement of the product specification and a requirement of this general specification, only the requirement of the product specification needs to be satisfied.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
The chemical composition of Inconel Alloy 600 is provided in the table below:
Ni + Co | Cr | Fe | C | Mn | S | Si | Cu |
72.0 min | 14.0-17.0 | 6.0-10.0 | .15 max | 1.00 max | .015 max | .50 max | .50 max |
Typical room temperature Tensile Properties of Annealed Material
Product Form | Condition | Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
Tube & Pipe | ot-Finished | 75-100 | 25-50 | 35*55 | - |
Tube & Pipe | Cold-Drawn | 80-100 | 25-50 | 35-55 | 88 Max |
The chemical composition of Inconel Alloy 601 is provided in the table below:
Ni | Cr | Al | C | Mn | Si | Fe |
---|---|---|---|---|---|---|
61.5 | 22.5 | 1.4 | .05 | .3 | .2 | 14 |
Typical room temperature Tensile Properties of Annealed Material
Tensile (psi) | .2% Yield (psi) | Elongation (%) |
---|---|---|
80,000 | 30,000 | 35 |
The chemical composition of Inconel Alloy 625 is provided in the table below:
Element | Percentage |
Carbon | 0.010 max |
Manganese | 0.50 max |
Phosphorus | 0.015 max |
Sulfur | 0.015 max |
Silicon | 0.50 max |
Chromium | 20.00 - 23.00 |
Nickel | Balance |
Molybdenum | 8.00 - 10.00 |
Iron | 5.00 max |
Titanium | 0.40 max |
Aluminum | 0.40 max |
Tantalum | 0.05 max |
Typical room temperature Tensile Properties of Annealed Material
Temp° F | Tensile (psi) | .2% Yield (psi) | Elongation in 2 “ (%) |
70 | 144,000 | 84,000 | 44 |
400 | 134,000 | 66,000 | 45 |
600 | 132,000 | 63,000 | 42.5 |
800 | 131,500 | 61,000 | 45 |
1000 | 130,000 | 60,500 | 48 |
1200 | 119,000 | 60,000 | 34 |
1400 | 78,000 | 58,500 | 59 |
1600 | 40,000 | 39,000 | 117 |
The Inconel Alloy 600 / 601 / 625 Pipes and Tubes is used in the following applications:-
Available Grade of Inconel® 600 / 601 / 625 ALLOY Pipes and Tubes in Ready Stock -
We Export Inconel 600 / 601 / 625 Pipes and Tubes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc
Savoy Piping Inc. is a well known worldwide Exporter of Inconel 600 / 601 / 625 Pipes and Tubes, Savoy Piping Inc. is committed to provide each and every customer with the highest standard of customer service. We deals in Inconel 600 / 601 / 625 Seamless Pipes and Tube in India and Overseas, offering a wide range of Inconel 600 / 601 / 625 Pipes and Tubes